Infinitely Variable Change Of Numeric Data Value - Danfoss VLT AutomationDrive FC 300 Programming Manual

2 How to Programme
2.1.12 Changing a Text Value
If the selected parameter is a text value, change the text value by means
▲ ▼
of the [ ] [ ] navigation keys.
The up key increases the value, and the down key decreases the value.
2
Place the cursor on the value you want to save and press [OK].
2.1.13 Changing a Group of Numeric Data Values
If the chosen parameter represents a numeric data value, change the
chosen data value by means of the [
▲ ▼
the [ ] [ ] navigation keys. Use the [
the cursor horizontally.
▲ ▼
Use the [ ] [ ] navigation keys to change the data value. The up key
enlarges the data value, and the down key reduces the data value. Place
the cursor on the value you want to save and press [OK].

2.1.14 Infinitely Variable Change of Numeric Data Value

If the chosen parameter represents a numeric data value, select a digit
◀ ▶
by means of the [ ] [ ] navigation keys.
Change the selected digit infinitely variably by means of the [
navigation keys.
The chosen digit is indicated by the cursor. Place the cursor on the digit
you want to save and press [OK].
2.1.15 Changing a Data Value, Step-by-Step
Certain parameters can be changed step by step or infinitely varying. This applies to par. 1-20
par. 1-23 Motor Frequency
The parameters are changed both as a group of numeric data values and as numeric data values infinitely varying.
24
◀ ▶
] [ ] navigation keys as well as
◀ ▶
] [ ] navigation keys to move
.
MG.33.M8.02 - VLT
▲ ▼
] [ ]
Motor Power [kW]
®
is a registered Danfoss trademark
FC 300 Programming Guide
Motor Voltage
, par. 1-22 and