Changing Data; Changing A Text Value; Changing; Infinitely Variable Change Of Numeric Data Value - Danfoss VLT AutomationDrive FC 302 Programming Manual

How to Programme

2.1.10 Changing Data

2 2
The procedure for changing data is the same in the Quick
Menu and the Main Menu mode. Press [OK] to change the
selected parameter.
The procedure for changing data depends on whether the
selected parameter represents a numerical data value or a
text value.

2.1.11 Changing a Text Value

If the selected parameter is a text value, change the text
value with the [
Place the cursor on the value to save and press [OK].
Illustration 2.16 Changing a Text Value

2.1.12 Changing

If the selected parameter represents a numeric data value,
change the selected data value by means of the [
navigation keys as well as the [
◀ ▶
[ ] [ ] keys to move the cursor horizontally.
Illustration 2.17 Changing a Data Value
▲ ▼
Press [ ] [ ] keys to change the data value. [
the data value, and [
cursor on the value to save and press [OK].
20
VLT
▲ ▼
] [ ] keys.
740RPM 10.64 A
Basic Settings
0 -01 Language
[0] English
▲ ▼
] [ ] navigation keys. Press
113 RPM 1.78 A
Load depen. setting
1 - 60 Low speed load
compensation
100%
▼
] decreases the data value. Place the
®
AutomationDrive FC 301/302 Programming Guide
Illustration 2.18 Saving a Data Value
2.1.13 Infinitely Variable Change of
If the selected parameter represents a numeric data value,
select a digit with [
1 [1]
0-0 *
Illustration 2.19 Selecting a Digit
Change the selected digit infinitely variably with [
The selected digit is indicated by the cursor. Place the
cursor on the digit to save and press [OK].
◀ ▶
] [ ]
1(1)
1- 6*
Illustration 2.20 Saving

2.1.14 Value, Step-by-Step

Certain parameters can be changed step by step or
infinitely varying. This applies to 1-20 Motor Power [kW],
1-22 Motor Voltage and 1-23 Motor Frequency.
▲
] increases
The parameters are changed both as a group of numeric
data values and as numeric data values infinitely varying.
2.1.15 Read-out and Programming of
Parameters are indexed when placed in a rolling stack.
Parameter 15-30 Fault Log: Error Code to
parameter 15-32 Alarm Log: Time contain a fault log which
can be read out. Select a parameter, press [OK], and use
▲ ▼
[ ] [ ] to scroll through the value log.
MG33MI02 - Rev. 2013-11-20
729RPM 6.21A
Load depen. setting
1 - 60 Low speed load
compensation
1 0% 6
Numeric Data Value
◀ ▶
] [ ].
635 RPM 0.44 A
Start Adjustments
1 - 71 Start Delay
00.0s
957RPM 11.58A
Start Adjustments
1-71 High starting torque time
0. s
4
Indexed Parameters
1(1)
1- 6*
1 (1)
1- 7*
▲ ▼
] [ ].
1 (1)
1-7*