Danfoss VLT AutomationDrive FC 300 Programming Manual page 210

FC 300 Programming Guide
15-22 Historic Log: Time
Array [50]
Range:
0 ms* [0 - 2147483647 ms]
3.16.5 15-3* Alarm Log
Parameters in this group are array parameters, where up to 10 fault logs can be viewed. [0] is the most recent logged data, and [9] the oldest. Error
codes, values, and time stamp can be viewed for all logged data.
15-30 Fault Log: Error Code
Array [10]
Range:
0* [0 - 255 ]
15-31 Alarm Log: Value
Array [10]
Range:
0 N/A* [-32767 - 32767 N/A]
15-32 Alarm Log: Time
Array [10]
Range:
0 s* [0 - 2147483647 s]
3.16.6 15-4* Drive Identification
Parameters containing read only information about the hardware and software configuration of the frequency converter.
15-40 FC Type
Range:
0* [0 - 0 ]
Digtal input
Digital output (not monitored in
this SW release)
Warning word
Alarm word
Status word
Control word
Extended status word
Function:
View the time at which the logged event occurred. Time is measured in ms since frequency converter
start. The max. value corresponds to approx. 24 days which means that the count will restart at
zero after this time period.
Function:
View the error code and look up its meaning in the
Guide.
Function:
View an extra description of the error. This parameter is mostly used in combination with alarm 38
'internal fault'.
Function:
View the time when the logged event occurred. Time is measured in seconds from frequency con-
verter start-up.
Function:
View the FC type. The read-out is identical to the FC 300 Series power field of the type code defi-
nition, characters 1-6.
®
MG.33.M8.02 - VLT is a registered Danfoss trademark
3 Parameter descriptions
Digital Input
Decimal value. See par. 16-60
after converting to binary value.
Decimal value. See par. 16-66 Digital Output [bin]
scription after converting to binary value.
Decimal value. See par. 16-92 Warning Word
tion.
Alarm Word
Decimal value. See par. 16-90
Status Word
Decimal value. See par. 16-03
after converting to binary value.
Decimal value. See par. 16-00 Control Word
Decimal value. See par. 16-94 Ext. Status Word
scription.
Troubleshooting
chapter of the FC 300 Design
for description
for de-
for descrip-
for description.
for description
3
for description.
for de-
209