Danfoss VLT AutomationDrive FC 300 Programming Manual page 185

Hide thumbs Also See for VLT AutomationDrive FC 300:
Table of Contents

Advertisement

3 Parameter descriptions
13-20 SL Controller Timer
Range:
Application
[Application dependant]
dependent*
3
3.14.5 13-4* Logic Rules
Combine up to three boolean inputs (TRUE / FALSE inputs) from timers, comparators, digital inputs, status bits and events using the logical operators
AND, OR, and NOT. Select boolean inputs for the calculation in par. 13-40
Rule Boolean 3
. Define the operators used to logically combine the selected inputs in par. 13-41
2
.
Priority of calculation
The results of par. 13-40
Logic Rule Boolean 1
(TRUE / FALSE) of this calculation is combined with the settings of par. 13-43
final result (TRUE / FALSE) of the logic rule.
13-40 Logic Rule Boolean 1
Array [6]
Option:
[0] *
False
[1]
True
[2]
Running
[3]
In range
[4]
On reference
[5]
Torque limit
[6]
Current limit
[7]
Out of current range
[8]
Below I low
[9]
Above I high
[10]
Out of speed range
[11]
Below speed low
[12]
Above speed high
[13]
Out of feedb. range
[14]
Below feedb. low
[15]
Above feedb. high
[16]
Thermal warning
[17]
Mains out of range
[18]
Reversing
[19]
Warning
[20]
Alarm (trip)
[21]
Alarm (trip lock)
[22]
Comparator 0
[23]
Comparator 1
[24]
Comparator 2
[25]
Comparator 3
[26]
Logic rule 0
184
Function:
Enter the value to define the duration of the FALSE output from the programmed timer. A timer is
only FALSE if it is started by an action (i.e.
elapsed.
Logic Rule Boolean 1
, par. 13-41
Logic Rule Operator 1
and par. 13-42
Logic Rule Operator 2
Function:
Select the first boolean (TRUE or FALSE) input for the selected logic rule.
Start Event
See par. 13-01
([0] - [61]) and par. 13-02
®
MG.33.M8.02 - VLT
is a registered Danfoss trademark
FC 300 Programming Guide
Start timer 1 [29]
) and until the given timer value has
Logic Rule Boolean 2
, par. 13-42
and par. 13-44
Logic Rule Operator 1
and par. 13-43
Logic Rule Boolean 2
are calculated first. The outcome
and par. 13-44
Logic Rule Boolean 3
Stop Event
([70] - [75]) for further description.
Logic
Logic Rule Operator
, yielding the

Advertisement

Table of Contents
loading

Table of Contents