Danfoss VLT AutomationDrive FC 300 Programming Manual page 239

4 Parameter Lists
4.1.5 4-** Limits / Warnings
Par. Parameter description
No. #
4-1* Motor Limits
4-10 Motor Speed Direction
4-11 Motor Speed Low Limit [RPM]
4-12 Motor Speed Low Limit [Hz]
4-13 Motor Speed High Limit [RPM]
4-14 Motor Speed High Limit [Hz]
4-16 Torque Limit Motor Mode
4-17 Torque Limit Generator Mode
4-18 Current Limit
4
4-19 Max Output Frequency
4-2* Limit Factors
4-20 Torque Limit Factor Source
4-21 Speed Limit Factor Source
4-3* Motor Speed Mon.
4-30 Motor Feedback Loss Function
4-31 Motor Feedback Speed Error
4-32 Motor Feedback Loss Timeout
4-34 Tracking Error Function
4-35 Tracking Error
4-36 Tracking Error Timeout
4-37 Tracking Error Ramping
4-38 Tracking Error Ramping Timeout
4-39 Tracking Error After Ramping Timeout
4-5* Adj. Warnings
4-50 Warning Current Low
4-51 Warning Current High
4-52 Warning Speed Low
4-53 Warning Speed High
4-54 Warning Reference Low
4-55 Warning Reference High
4-56 Warning Feedback Low
4-57 Warning Feedback High
4-58 Missing Motor Phase Function
4-6* Speed Bypass
4-60 Bypass Speed From [RPM]
4-61 Bypass Speed From [Hz]
4-62 Bypass Speed To [RPM]
4-63 Bypass Speed To [Hz]
238
Default value 4-set-up
null All set-ups
SR All set-ups
SR All set-ups
SR All set-ups
SR All set-ups
SR All set-ups
100.0 % All set-ups
SR All set-ups
132.0 Hz All set-ups
[0] No function All set-ups
[0] No function All set-ups
[2] Trip All set-ups
300 RPM All set-ups
0.05 s All set-ups
null All set-ups
10 RPM All set-ups
1.00 s All set-ups
100 RPM All set-ups
1.00 s All set-ups
5.00 s All set-ups
0.00 A All set-ups
ImaxVLT (P1637) All set-ups
0 RPM All set-ups
outputSpeedHighLimit
(P413) All set-ups
-999999.999 N/A All set-ups
999999.999 N/A All set-ups
-999999.999 Reference-
FeedbackUnit All set-ups
999999.999 ReferenceFeed-
backUnit All set-ups
null All set-ups
SR All set-ups
SR All set-ups
SR All set-ups
SR All set-ups
®
MG.33.M8.02 - VLT is a registered Danfoss trademark
FC 300 Programming Guide
FC 302 Change dur- Conver-
only ing opera- sion index
tion
FALSE -
TRUE 67
TRUE -1
TRUE 67
TRUE -1
TRUE -1
TRUE -1
TRUE -1
FALSE -1
TRUE -
TRUE -
TRUE -
TRUE 67
TRUE -2
TRUE -
TRUE 67
TRUE -2
TRUE 67
TRUE -2
TRUE -2
TRUE -2
TRUE -2
TRUE 67
TRUE 67
TRUE -3
TRUE -3
TRUE -3
TRUE -3
TRUE -
TRUE 67
TRUE -1
TRUE 67
TRUE -1
Type
Uint8
Uint16
Uint16
Uint16
Uint16
Uint16
Uint16
Uint32
Uint16
Uint8
Uint8
Uint8
Uint16
Uint16
Uint8
Uint16
Uint16
Uint16
Uint16
Uint16
Uint32
Uint32
Uint16
Uint16
Int32
Int32
Int32
Int32
Uint8
Uint16
Uint16
Uint16
Uint16