Danfoss VLT AutomationDrive FC 300 Programming Manual page 39

3 Parameter descriptions
[3456] Track Error
[3457] Synchronizing Error
[3458] Actual Velocity
[3459] Actual Master Velocity
[3460] Synchronizing Status
[3461] Axis Status
[3462] Program Status
3
[3464] MCO 302 Status
[3465] MCO 302 Control
[3470] MCO Alarm Word 1
[3471] MCO Alarm Word 2
[9913] Idle time
[9914] Paramdb requests in queue
[9920] HS Temp. (PC1)
[9921] HS Temp. (PC2)
[9922] HS Temp. (PC3)
[9923] HS Temp. (PC4)
[9924] HS Temp. (PC5)
[9925] HS Temp. (PC6)
[9926] HS Temp. (PC7)
[9927] HS Temp. (PC8)
0-21 Display Line 1.2 Small
Option:
[1614] * Motor Current
0-22 Display Line 1.3 Small
Option:
[1610] * Power [kW]
0-23 Display Line 2 Large
Option:
[1613] * Frequency
0-24 Display Line 3 Large
Select a variable for display in line 3.
Option:
[1502] * kWh Counter
38
Function:
Select a variable for display in line 1, middle position. The options are the same as listed for par.
0-20.
Function:
Select a variable for display in line 1, right position. The options are the same as listed for par. 0-20.
Function:
Select a variable for display in line 2. The options are the same as listed for par. 0-20.
Function:
The options are the same as those listed in par. 0-20
®
MG.33.M8.02 - VLT is a registered Danfoss trademark
FC 300 Programming Guide
Display Line 1.1 Small
.