Danfoss VLT AutomationDrive FC 300 Programming Manual page 45

3 Parameter descriptions
0-66 Access to Quick Menu w/o Password
Option:
[0] * Full access
[1] LCP: Read only
[2] LCP: No access
[3] Bus: Read only
3
[4] Bus: No access
[5] All: Read only
[6] All: No access
If par. 0-61 Access to Main Menu w/o Password
0-67 Bus Password Access
Range:
0* [0 - 9999 ]
44
Function:
Disables the password defined in par. 0-65
Prevents unauthorised editing of Quick Menu parameters.
Prevents unauthorised viewing and editing of Quick Menu parameters.
Read only functions for Quick Menu parameters on fieldbus and/ or FC standard bus.
No access to Quick Menu parameters is allowed via fieldbus and/ or FC standard bus.
read only function for Quick Menu parameters on LCP, fieldbus or FC standard bus.
No access from LCP, fieldbus or FC standard bus is allowed.
is set to Full access [0] then this parameter will be ignored.
Function:
Writing to this parameter enables users to unlock the frequency converter from bus/ MCT10.
®
MG.33.M8.02 - VLT is a registered Danfoss trademark
FC 300 Programming Guide
Quick Menu Password
.