Changing Data; Changing A Text Value; Changing; Infinitely Variable Change Of Numeric Data Value - Danfoss VLT AutomationDrive FC 301 Programming Manual

Hide thumbs Also See for VLT AutomationDrive FC 301:
Table of Contents

Advertisement

How to Programme

2.1.10 Changing Data

The procedure for changing data is the same in the Quick
menu and the Main menu mode. Press [OK] to change the
selected parameter.
The procedure for changing data depends on whether the
selected parameter represents a numerical data value or a
text value.

2.1.11 Changing a Text Value

If the selected parameter is a text value, change the text
value with the [
] [
] keys.
Place the cursor on the value to save and press [OK].
740RPM
Basic Settings
0 -01 Language
[0] English
Illustration 2.16 Changing a Text Value

2.1.12 Changing

If the selected parameter represents a numeric data value,
change the selected data value by means of the [
navigation keys as well as the [
[
] [
] keys to move the cursor horizontally.
113 RPM
Load depen. setting
1 - 60 Low speed load
compensation
100%
Illustration 2.17 Changing a Data Value
Press [
] [
] keys to change the data value. [
the data value, and [
] decreases the data value. Place the
cursor on the value to save and press [OK].
®
VLT
AutomationDrive FC 301/302 Programming Guide
10.64 A
1 [1]
0-0 *
] [
]
] [
] navigation keys. Press
1.78 A
1(1)
1- 6*
] increases
MG33MH02 - Rev. 2013-09-30
729RPM
Load depen. setting
1 - 60 Low speed load
compensation
1 0%
6
Illustration 2.18 Saving a Data Value
2.1.13 Infinitely Variable Change of
Numeric Data Value
If the selected parameter represents a numeric data value,
select a digit with [
] [
].
635 RPM
Start Adjustments
1 - 71 Start Delay
00.0s
Illustration 2.19 Selecting a Digit
Change the selected digit infinitely variably with [
The selected digit is indicated by the cursor. Place the
cursor on the digit to save and press [OK].
957RPM
Start Adjustments
1-71 High starting torque time
0. s
4
Illustration 2.20 Saving

2.1.14 Value, Step-by-Step

Certain parameters can be changed step by step or
infinitely varying. This applies to 1-20 Motor Power [kW],
1-22 Motor Voltage and 1-23 Motor Frequency.
The parameters are changed both as a group of numeric
data values and as numeric data values infinitely varying.
2.1.15 Read-out and Programming of
Indexed Parameters
Parameters are indexed when placed in a rolling stack.
15-30 Fault Log: Error Code to 15-32 Alarm Log: Time contain
a fault log which can be read out. Select a parameter,
press [OK], and use [
] [
] to scroll through the value log.
Use 3-10 Preset Reference as another example:
6.21A
1(1)
1- 6*
0.44 A
1 (1)
1- 7*
] [
].
11.58A
1 (1)
1-7*
19
2
2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VLT AutomationDrive FC 301 and is the answer not in the manual?

This manual is also suitable for:

Vlt automationdrive fc 302

Table of Contents