Changing Data; Changing A Text Value; Changing A Data Value; Infinitely Variable Change Of Numeric Data Value - Danfoss VLT AutomationDrive FC 302 Programming Manual

How to Program
After selecting a parameter group, select a parameter with
the navigation keys.
The middle section on the display shows the parameter
number and name as well as the selected parameter value.
740RPM
Basic Settings
0 -01 Language
[0] English
Illustration 2.15 Parameter Selection

2.1.10 Changing Data

The procedure for changing data is the same in the Quick
Menu and the Main Menu mode. Press [OK] to change the
selected parameter.
The procedure for changing data depends on whether the
selected parameter represents a numeric data value or a
text value.

2.1.11 Changing a Text Value

If the selected parameter is a text value, change the text
▲ ▼
value with the [ ] [ ] keys.
Place the cursor on the value to save and press [OK].
740RPM
Basic Settings
0 -01 Language
[0] English
Illustration 2.16 Changing a Text Value

2.1.12 Changing a Data Value

If the selected parameter represents a numeric data value,
change the selected data value by means of the [
navigation keys as well as the [
◀ ▶
[ ] [ ] keys to move the cursor horizontally.
MG33MJ02
Programming Guide
10.64A 1 [1]
0-0 *
10.64 A 1 [1]
0-0 *
◀ ▶
] [ ]
▲ ▼
] [ ] navigation keys. Press
Danfoss A/S © Rev. 10/2014 All rights reserved.
113 RPM
Load depen. setting
1 - 60 Low speed load
compensation
100%
Illustration 2.17 Changing a Data Value
▲ ▼
Press [ ] [ ] keys to change the data value. [
▼
the data value, and [ ] decreases the data value. Place the
cursor on the value to save and press [OK].
729RPM
Load depen. setting
1 - 60 Low speed load
compensation
1 0% 6
Illustration 2.18 Saving a Data Value
2.1.13 Infinitely Variable Change of
Numeric Data Value
If the selected parameter represents a numeric data value,
◀ ▶
select a digit with [ ] [ ].
635 RPM
Start Adjustments
1 - 71 Start Delay
00.0s
Illustration 2.19 Selecting a Digit
Change the selected digit infinitely variably with [
The selected digit is indicated by the cursor. Place the
cursor on the digit to save and press [OK].
957RPM
Start Adjustments
1-71 High starting torque time
0. s
4
Illustration 2.20 Saving
1.78 A 1(1)
1- 6*
▲
] increases
6.21A 1(1)
1- 6*
0.44 A 1 (1)
1- 7*
▲ ▼
] [ ].
11.58A 1 (1)
1-7*
19
2 2