Danfoss VLT AutomationDrive FC 300 Programming Manual page 194

FC 300 Programming Guide
[35] Set digital out D low
[36] Set digital out E low
[37] Set digital out F low
[38] Set digital out A high
[39] Set digital out B high
[40] Set digital out C high
[41] Set digital out D high
[42] Set digital out E high
[43] Set digital out F high
[60] Reset Counter A
[61] Reset Counter B
[70] Start timer 3
[71] Start timer 4
[72] Start timer 5
[73] Start timer 6
[74] Start timer 7
Set digital output D low
[35] - any output with SL output D will be low.
Set digital output E low [36] - any output with SL output E will be low.
Set digital output F low
[37] - any output with SL output F will be low.
Set digital output A high
[38] - any output with SL output A will be high.
Set digital output B high [39] - any output with SL output B will be high.
Set digital output C high [40] - any output with SL output C will be high.
Set digital output D high
[41] - any output with SL output D will be high.
Set digital output E high
[42] - any output with SL output E will be high.
Set digital output F high [43] - any output with SL output Fwill be high.
Reset Counter A
[60] - resets Counter A to zero.
Reset Counter B
[61] - resets Counter B to zero.
Start Timer 3
[70] - Start Timer 3, see par. 13-20 for further description.
Start Timer 4 [71] - Start Timer 4, see par. 13-20 for further description.
Start Timer 5
[72] - Start Timer 5, see par. 13-20 for further description.
Start Timer 6
[73] - Start Timer 6, see par. 13-20 for further description.
Start Timer 7
[74] - Start Timer 7, see par. 13-20 for further description.
®
MG.33.M8.02 - VLT is a registered Danfoss trademark
3 Parameter descriptions
3
193