Danfoss VLT AutomationDrive FC 300 Programming Manual page 191

3 Parameter descriptions
3.14.6 13-5* States
Parameters for programming the Smart Logic Controller.
13-51 SL Controller Event
Array [20]
Option:
[0] * False
3
[1] True
[2] Running
[3] In range
[4] On reference
[5] Torque limit
[6] Current limit
[7] Out of current range
[8] Below I low
[9] Above I high
[10] Out of speed range
[11] Below speed low
[12] Above speed high
[13] Out of feedb. range
[14] Below feedb. low
[15] Above feedb. high
[16] Thermal warning
[17] Mains out of range
[18] Reversing
[19] Warning
[20] Alarm (trip)
[21] Alarm (trip lock)
[22] Comparator 0
[23] Comparator 1
[24] Comparator 2
[25] Comparator 3
[26] Logic rule 0
[27] Logic rule 1
[28] Logic rule 2
[29] Logic rule 3
[30] SL Time-out 0
[31] SL Time-out 1
[32] SL Time-out 2
[33] Digital input DI18
[34] Digital input DI19
[35] Digital input DI27
[36] Digital input DI29
[37] Digital input DI32
[38] Digital input DI33
[39] Start command
190
Function:
Select the boolean input (TRUE or FALSE) to define the Smart Logic Controller event.See
Start Event
par. 13-01 ([0] - [61]) and par. 13-02
®
MG.33.M8.02 - VLT is a registered Danfoss trademark
FC 300 Programming Guide
Stop Event
([70] - [74]) for further description.