Danfoss VLT AutomationDrive FC 300 Programming Manual page 116

FC 300 Programming Guide
5-96 Pulse Out #29 Timeout Preset
Range:
0.00 %* [0.00 - 100.00 %]
5-97 Pulse Out #X30/6 Bus Control
Range:
0.00 %* [0.00 - 100.00 %]
5-98 Pulse Out #X30/6 Timeout Preset
Range:
0.00 %* [0.00 - 100.00 %]
Function:
Set the output frequency transferred to the output terminal 29 when the terminal is configured as
Terminal 29 Pulse Output Variable
'Bus Ctrl Timeout' in par. 5-63
This parameter only applies for FC 302.
Function:
Set the output frequency transferred to the output terminal X30/6 when the terminal is configured
Terminal X30/6 Pulse Output Variable
as 'Bus Controlled' in par. 5-66
Variable [45].
Function:
Set the output frequency transferred to the output terminal X30/6 when the terminal is configured
as 'Bus Ctrl Timeout' in par. 5-66
detected.
®
MG.33.M8.02 - VLT is a registered Danfoss trademark
3 Parameter descriptions
[48]. And a time-out is detected.
, Terminal X30/6 Pulse Output
Terminal X30/6 Pulse Output Variable
3
[48]. And a time-out is
115