Danfoss VLT AutomationDrive FC 300 Programming Manual page 98

FC 300 Programming Guide
5-10 Terminal 18 Digital Input
Option:
[8] * Start
5-11 Terminal 19 Digital Input
Option:
[10] * Reversing
5-12 Terminal 27 Digital Input
Option:
[2] * Coast inverse
5-13 Terminal 29 Digital Input
Option:
[14] * Jog
5-14 Terminal 32 Digital Input
Option:
[0] * No operation
5-15 Terminal 33 Digital Input
Option:
[0] * No operation
5-16 Terminal X30/2 Digital Input
Option:
[0] * No operation
5-17 Terminal X30/3 Digital Input
Option:
[0] * No operation
5-18 Terminal X30/4 Digital Input
Option:
[0] * No operation
Function:
Functions are described under 5-1*
Function:
Functions are described under 5-1*
Function:
Functions are described under 5-1*
Function:
Select the function from the available digital input range and the additional options [60], [61], [63]
and [64]. Counters are used in Smart Logic Control functions.This parameter is available for FC 302
only.
Functions are described under 5-1*
Function:
Select the function from the available digital input range and the additional options [60], [61], [63]
and [64]. Counters are used in Smart Logic Control functions.
Functions are described under 5-1*
Function:
Select the function from the available digital input range and the additional options [60], [61], [63]
and [64]. Counters are used in Smart Logic Control functions.
Functions are described under 5-1*
Function:
This parameter is active when option module MCB101 is installed in the frequency converter. Func-
Digital Inputs
tions are described under 5-1*
Function:
This parameter is active when option module MCB101 is installed in the frequency converter. Func-
Digital Inputs
tions are described under 5-1*
Function:
This parameter is active when option module MCB101 is installed in the frequency converter. Func-
tions are described under 5-1* Digital Inputs
®
MG.33.M8.02 - VLT is a registered Danfoss trademark
3 Parameter descriptions
Digital Inputs
Digital Inputs
Digital Inputs
Digital Inputs
Digital Inputs
Digital Inputs
3
97