Infinitely Variable Change Of Numeric Data Value; Value, Step By Step; Readout And Programming Of Indexed Parameters - Danfoss VLT AutomationDrive EZ FC 321 Programming Manual

VLT® AutomationDrive EZ FC 321
Programming Guide
113 RP M 1.78 A
L oad depen. setting
1 - 60 L o w speed load
c ompensa tion
1 0 0%
Illustration 19: Changing a Data Value
Press the [▵] [▿] keys to change the data value. [▵] increases the data value, and [▿] decreases the data value. Place the cursor on the
value to save and press [OK].
729RP M 6.21A
L oad depen. setting
1 - 60 L o w speed load
c ompensa tion
1 0% 6
Illustration 20: Saving a Data Value

3.1.13 Infinitely Variable Change of Numeric Data Value

If the selected parameter shows a numeric data value, select a digit with [◃] [▹].
635 RP M 0.44 A
S tar t A djustmen ts
1 - 71 S tar t D ela y
00. 0 s
Illustration 21: Selecting a Digit
Change the selected digit infinitely variably with [▵] [▿]. The cursor indicates the selected digit. Place the cursor on the digit to save
and press [OK].
957RP M 11.58A
S tar t A djustmen ts
1-71 H igh star ting t or que time
0. s
4
Illustration 22: Saving

3.1.14 Value, Step by Step

Certain parameters can be changed step by step. This applies to:
•
Parameter 1-20 Motor Power [kW].
•
Parameter 1-22 Motor Voltage.
• Parameter 1-23 Motor Frequency.
The parameters are changed both as a group of numeric data values and as numeric data values that are infinitely varying.

3.1.15 Readout and Programming of Indexed Parameters

Parameters are indexed when placed in a rolling stack. Parameter 15-30 Fault Log: Error Code to parameter 15-32 Alarm Log: Time
contain a fault log, which can be read out. Select a parameter, press [OK], and press the [▵] [▿] keys to scroll through the value log.
30 | Danfoss A/S © 2021.08
1(1)
1- 6*
1(1)
1- 6*
1 (1)
1- 7*
1 (1)
1-7*
How to Program
AU373327181955en-000101 / 130R1208