Configuring temperature alarm thresholds for a
card
Configuring temperature alarm thresholds for a card
Use the following command to set temperature alarm thresholds for a card. When the temperature of a
card exceeds a threshold, the router generates alarm signals.
To configure temperature alarm thresholds for a card:
Step
1.
Enter system view
2.
Configure temperature alarm
thresholds for a card
Displaying the temperature information
Use the display environment command to display temperature information of the sensors on the cards,
including the current temperature and temperature thresholds.
# Display the temperature information of the cards on the router.
<Sysname> display environment
System temperature information (degree centigrade):
-------------------------------------------------------------------------------
Slot
Sensor
0
hotspot 1
0
hotspot 2
3
hotspot 1
3
hotspot 2
Table 20 Command output
Field
Slot
Sensor
Temperature
Lower limit
WarningLimit
AlarmLimit
ShutdownLimit
Command
system-view
temperature-limit slot slot-number
hotspot sensor-num LowerLimit
WarningLimit [ AlarmLimit ]
Temperature
LowerLimit
39
40
20
55
-10
42
-5
Description
Slot number of a card.
Temperature sensor:
hotspot—Hotspot temperature sensor.
Current temperature.
Lower limit of temperature.
Upper limit of temperature for warning.
Upper limit of temperature for alarming.
Upper limit of temperature for shutting down the router (currently not supported).
WarningLimit
0
70
80
60
65
57
Remarks
N/A
Optional.
AlarmLimit ShutdownLimit
85
N/A
95
N/A
80
N/A
85
N/A