Volkswagen Passat 1995 Official Factory Repair Manual page 3894

Luggage compartment cover, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.BD01.68.2
Luggage compartment cover, retrofitting
- Remove front and rear luggage compartment
trim from Page 70-51
- Cut out marked openings in inertial reel cover
and rear trim (holes for spring nut 9 mm wide, 13
mm high, center hole 16 mm diameter). Holes
are marked on inside for PR No. 3U2. On
vehicles without marking use guide rail as
template.
- Insert retaining bracket into inertia reel and
fasten with screws.
- Install securing bracket to side trim.
- Reinstall trim.
- Loosely install guide rails and align toward rear
according to outside shape of trim.
- Tighten all screws.
- Install luggage cover.
Page 3 of 3
.
12/7/2004
68-6