Instrument panel, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.BD01.70.1
- Remove heater control panel -3- and remove
screws -2- from instrument panel.
- Press control panel -1- with attached cables below
instrument panel.
- Drill out shear bolts of steering column and lower
steering column.
- Disconnect harness connector -1-.
- Disconnect ground wires at left and right
instrument panel -2-.
- Only remove connectors at central electric -3- that
are attached to instrument panel wiring harness.
Note:
Do not open retainers of instrument panel wiring
harness.
Page 2 of 14
70-2
12/7/2004