Suzuki GA413 Service Manual page 653

1. Eyeleteer
Adhesive materials and tools required for removal and installation.
D One component urethane adhesive and primers used in com-
bination (For one sheet of windshield).
Adhesive (300 g (14.1 oz.))
Primer for glass (15 g (0.5 oz.))
Primer for body (15 g (0.5 oz.))
D Eyeleteer
D Piano string
D Brush for primer application (2 pcs)
D Knife
D Rubber sucker grip
D Sealant gun (for filling adhesive)
D Putty spatula (for correcting adhered parts)
REMOVAL
1) Clean both inside and outside of glass and around it.
2) Remove wiper arms.
3) Remove garnish and stoppers.
4) Using tape, cover body surface around glass to prevent any
damage.
5) Remove instrument panel and head lining.
6) Remove rear view mirror, sunvisor, front pillar trims and then
windshield trims from front pillars (right & left).
7) Remove (or cut) windshield molding all around until windshield
edge comes out.
8) Cut adhesive all around glass with windshield knife.
If cut with piano string, follow step 9) and 10).
9) Drill hole with eyeleteer through adhesive and let piano string
through it.
BODY SERVICE 9-17