1. Circlip
2. Master cylinder
DISASSEMBLY
1) Remove the pin that fixes cylinder body and connector by using
special tool.
Special Tool
(A): 09922-85811
2) Remove connector and 2 grommets.
1. Connector
2. Pin
3. Grommets
3) Remove circlip.
4) Remove primary piston.
Remove piston stopper bolt. Then remove secondary piston by
blowing compressed air into hole from which piston stopper bolt
was removed.
Be cautions during removal as secondary piston jumps out.
1. Stopper bolt
2. Compressed air
BRAKES 5-47