Suzuki GA413 Service Manual page 765

0B-6 MAINTENANCE AND LUBRICATION
[A]
[B]
[A]: 2WD 1. Drain plug
[B]: 4WD 2. Filler/level plug
CHASSIS AND BODY
ITEM 6-7'
Wheel Bearing Inspection
1) Check front wheel bearing for wear, damage, abnormal noise
or rattles. For details, refer to "WHEEL DISC, NUT AND BEAR-
ING CHECK" in Section 3D.
2) Check rear wheel bearing for wear, damage, abnormal noise or
rattles. For details, refer to "WHEEL DISC, NUT AND BEARING
CHECK" in Section 3E.
ITEM 6-9
Manual Transmission Oil (Including Transfer Oil for 4WD)
Inspection
1) Inspect transmission case for evidence of oil leakage.
Repair leaky point if any.
2) Make sure that vehicle is placed level for oil level check.
3) Remove level plug of transmission.
4) Check oil level.
Oil level can be checked roughly by means of level plug hole.
That is, if oil flows out of level plug hole or if oil level is found up
to hole when level plug is removed, oil is properly filled.
If oil is found insufficient, pour specified amount of specified oil.
5) Tighten level plug to specified torque.
Refer to MAINTENANCE SERVICE in SECTION 7A or 7A1.
Change
Change transmission oil with new specified oil. Refer to MAINTE-
NANCE SERVICE in SECTION 7A or 7A1.