Suzuki GA413 Service Manual page 1067

3D1-10 FRONT SUSPENSION (4WD)
1. Strut damper assembly
2. Spring compressor
DISASSEMBLY
1) Remove strut support cap and loosen strut nut a little by using
special tools.
Special Tool
(A): 09945-26010 (17 mm socket)
(B): 09900-00411 (Socket)
(C): 09900-00414 (6 mm)
NOTE:
When disassembling strut assembly, loosen strut nut a
little before compressing strut spring. This will make disas-
sembly easier. Note, however, nut must not be removed at
this point.
2) Using a spring compressor, compress strut spring till its force
pressing the spring seat is released.
CAUTION:
Use a commercially available spring compressor and fol-
low the operation procedure described in the Instruction
Manual supplied with the spring compressor.
3) While keeping spring compressed with spring compressor, re-
move strut nut and then disassemble parts.