Suzuki GA413 Service Manual page 291

1. Sensor ring
2. Drum
1. Sensor ring
1. Hydraulic press
2. Drum
ANTILOCK BRAKE SYSTEM (ABS) (OPTIONAL) 5E-37
REAR WHEEL SENSOR RING
REMOVAL
1) Remove ABS rear wheel sensor from rear axle housing.
2) Remove brake drum referring to Section 5 of this manual.
3) Remove sensor ring from brake drum using special tool.
Special Tool
(A): 09927-18411
(B): 09921-57810
CAUTION:
Pull out sensor ring from brake drum gradually and
evenly. Attempt to pull it out partially may cause it to
be deformed.
INSPECTION
D Check ring serration (teeth) for being missing, damaged or de-
formed.
D Check sensor ring for being deformed (warped).
D Check that no foreign material is attached.
If any malcondition is found, repair or replace.
INSTALLATION
NOTE:
Do not reuse (reinstall) removed sensor ring.
1) Install new sensor ring to brake drum using special tool.
Special Tool
(C): 09941-34513-004
2) Install brake drum. Refer to Section 5 of this manual.
3) Install ABS rear wheel speed sensor to rear axle housing.
Tightening Torque
(a): 10 N·m (1.0 kg-m, 7.2 lb-ft)