Suzuki GA413 Service Manual page 571

7A-32 MANUAL TRANSMISSION
Be sure to torque each bolt and nut according to specification given below, whenever loosened.
If specified torque for particular bolt or nut is not included in the list, refer to Section 0A.
Fastening Parts Fastening Parts
Transmission case bolt
Extension case bolt
Transmission oil filler and drain plug
Input shaft bearing retainer bolt
Transmission bolt bracket bolt
Transmission to engine bolt and nut
Transmission stiffener bolt
MATERIALS
Lithium grease
Sealant
Thread lock cement
TIGHTENING TORQUE SPECIFICATIONS
REQUIRED SERVICE MATERIALS
RECOMMENDED
SUZUKI PRODUCTS
SUZUKI SUPER GREASE A
(99000-25010)
SUZUKI SUPER GREASE I
(99000-25210)
SUZUKI BOND NO.1215
(99000-31110)
THREAD LOCK 1322
(99000-32110)
Tightening Torque
N·m kg-m
23
23
23
23
25
61
55
D Oil seal lips
D Gear shift control lever
D Gear shift control cable end
D Input shaft spline front end
D Oil drain and filler plug
D Mating surface of transmission case
D Mating surface of extension case
D Mating surface of input shaft bearing retainer
D Mating surface of gear shift & select shaft assembly
D Gear shift stop bolt
lb-ft
2.3 17.0
2.3 17.0
2.3 17.0
2.3 17.0
2.5 18.0
6.1 44.5
5.5 40.0
USE