Suzuki GA413 Service Manual page 1098

7A1-4 MANUAL TRANSMISSION (4WD)
Viscosity chart
SAE
80W-90
75W-85, 75W-90
°C
–30 –20 –10 0 10
°F
–22 –4 14 32 50
Temperature
ON-VEHICLE SERVICE
MAINTENANCE SERVICE
OIL CHANGE
The transfer oil is used as manual transmission oil as well.
1) Before changing or inspecting oil, be sure to stop engine and lift
vehicle horizontally.
2) With vehicle lifted up, check oil level and leakage. If leakage ex-
ists, correct or repair it.
3) Remove 2 drain plugs (1) drain old oil. Then torque drain plug
as specified below after applying sealant to their thread.
"A": Sealant 99000-31110
Tightening Torque
(a): 23 N
4) Fill new specified oil as shown below by specified amount
(roughly up to level hole).
NOTE:
D It is highly recommended to use SAE 75W-90 gear oil.
D Whenever vehicle is hoisted for any service work other
20 30 40
than oil change, also be sure to check for oil leakage.
68 86 104
D If water or rust is mixed in drained oil, be sure to check
breather of transmission.
Gear Oil Specification
Oil Capacity:
5) Torque level/filler plug (2) in the same manner as drain plug.
.
m (2.3 kg-m, 17.0 lb-ft)
Oil grade: API GL-4
Viscosity: SAE 75W-85, 75W-90 or 80W-90
AXC externally mounted type transmission:
3.5 liters (7.40/6.16 US/lmp. pt)
AXC built-in type transmission:
3.7 liters (7.90/6.51 US/lmp. pt)