Suzuki GA413 Service Manual page 913

ENGINE AND EMISSION CONTROL SYSTEM 6E-21
INSTALLATION
1) Install fuel pump to its bracket.
2) Install fuel pump to fuel tank and then install fuel tank to body
according to procedure described in Section 6C.
FUEL PRESSURE REGULATOR
ON-VEHICLE INSPECTION
Perform fuel pressure inspection according to procedure de-
scribed in "Fuel Pressure Inspection" in this section.
REMOVAL
1) Relieve fuel pressure according to procedure described on
Section 6.
2) Disconnect battery negative cable from battery.
3) Disconnect fuel injector connectors from injectors.
4) Disconnect vacuum hose from fuel pressure regulator.
5) Remove fuel delivery pipe from intake manifold.
6) Remove fuel injectors from fuel delivery pipe.
CAUTION:
A small amount of fuel may be released when it is from
delivery pipe.
Place a shop cloth under delivery pipe so that re-
leased fuel is absorbed in it.
7) Remove fuel pressure regulator from fuel delivery pipe.
8) Disconnect fuel return hose from fuel pressure regulator.