Suzuki GA413 Service Manual page 1019

0A1-6 GENERAL INFORMATION
CAUTION:
D When using electric welding, be sure to temporarily dis-
able air bag system. Refer to DISABLING AIR BAG SYS-
TEM under SERVICE PRECAUTIONS in SECTION 10B.
D Never expose air bag system component parts directly to
hot air (drying or baking the vehicle after painting) or
flames.
D WARNING /CAUTION labels are attached on each part of
air bag system components. Be sure to follow the instruc-
tions.
D After vehicle is completely repaired, perform AIR BAG
DIAGNOSTIC SYSTEM CHECK in SECTION 10B.