Suzuki GA413 Service Manual page 225

1. Parking brake cable No.1
2. Parking brake cable No.2
A-1. Parking brake lever
A-2. Parking brake lever bolt
A-3. Cable lock nut
A-4. Bend the tongue for cable don't off
A-5. Cable stopper ring (Insert cable to center mem-
ber until cable stopper ring fit certainly.)
1. Center member
2. Parking brake cable No.1
3. Parking brake cable No.2 (Right side)
4. Parking brake cable No.2 (Left side)
5. Cross member
Angle "a" : within 12 degrees
Distance "b" : 20 – 30 mm (0.78 – 1.18 in.)
Tightening Torque
·
(a) :23 N m (2.3 kg-m, 17.0 Ib-ft)
·
(b) :6 N m (0.6 kg-m, 4.5 Ib-ft)
5) Remove cable from vehicle body.
3. Equalizer
B-1. Clamp
B-2. Stud blot insert direction
B-3. Cable
D-1. Equalizer
C-1. Cable end cover
INSTALLATION
1) Install parking brake cable to brake back plate as shown in fig-
1. Stopper ring
2. Brake back plate
E-1. Stopper ring
E-2. Brake back plate
ure.
BRAKES 5-29
F-1. Parking brake shoe lever
F-2. Nipple end
F-3. Guide plate