Suzuki GA413 Service Manual page 1126

7E-16 DIFFERENTIAL (FRONT)
5) Upon completion of gear tooth contact check in step 8), caulk
flange nut (2) with caulking tool (1) and hammer.
6) Clean mating surface of both carrier and cover and apply sealant
to differential front cover (2).
Then tighten 8 bolts (1) to specified torque.
"A": Sealant 99000-31110
Tightening Torque
.
(a): 23 N m (2.3 kg-m, 17.0 lb-ft)
7) Drive in differential oil seal by using special tool.
Special Tool
(A): 09944-66020