5-46 BRAKES
MASTER CYLINDER ASSEMBLY
1. Master cylinder
2. Flare nuts
3. Attaching nuts
[A] : with ABS
[B] : without ABS
REMOVAL
1) Clean around reservoir cap and take out fluid with syringe or
such.
2) Disconnect fuse box from steering support member.
3) Disconnect reservoir hose.
4) Disconnect brake pipes from master cylinder.
CAUTION:
Do not allow brake fluid to get on painted surfaces.
5) Remove two attaching nuts.
6) Remove master cylinder.
1. Piston stopper circlip
2. Piston stopper
3. Cylinder cup and plate
4. Primary piston
5. Piston cup
6. Secondary piston pressure cup
7. Primary piston Assy
8. Secondary piston
9. Secondary piston Assy
10. Secondary piston stopper bolt
11. Master cylinder body
12. O-ring