Suzuki GA413 Service Manual page 334

6A-28 ENGINE MECHANICAL
1. Oil plug
2. Timing belt
inside cover
8) Remove camshaft housing and camshaft.
9) Remove oil plug and timing belt inside cover.
10) Remove intake rocker arm with clip from rocker arm shaft.
1. Rocker arm (IN)
2. Clip
3. Rocker arm shaft
11) Remove rocker arm shaft bolts.
1. Rocker arm shaft bolt
2. Rocker arm shaft
12) Push off rocker arm shaft end to CMP sensor case side and
1. Rocker arm shaft
2. O-ring
NOTE:
To remove camshaft housing bolts, loosen them in such
order as indicated in figure, a little at a time.
NOTE:
Do not bend clip when removing intake rocker arm.
remove O-ring from shaft.