Suzuki GA413 Service Manual page 881

UNIT REPAIR OVERHAUL
ENGINE ASSEMBLY
INSTALLATION
1) Combine engine with transmission.
2) Tighten engine mounting bracket bolts (R & L) and rear mount-
ing nut as shown in the figure above.
3) Reverse removal procedure for installation.
D Install generator bracket, A/C compressor and generator re-
ferring to Section 1B and 6H.
D Tighten bolts of exhaust pipes to specified torque.
Tightening Torque
.
(a): 50 N m (5.0 kg-m, 36.5 lb-ft)
ENGINE MECHANICAL 6A-3