Suzuki GA413 Service Manual page 663

1. Recess for adhesive
2. Clip
1. Door opening trim
2. Rear door opening trim
3. Head lining (High roof)
4. Head lining (Low roof)
HEAD LINING
REMOVAL
1) Remove spot light.
2) Remove sunshade assembly.
3) Remove room light.
4) Remove assistant grips.
5) Remove inner trims covering head lining and door opening trim.
6) Remove head lining.
INSTALLATION
1) Clean roof where adhesive of head lining will be attached.
2) Apply adhesive on recess of head lining and install it to body.
3) Install assistant grips and clips from front side of vehicle to rear
side.
4) Install door opening trim.
5) Install spot light, sunshade assembly, room light and inner trims
covering head lining.
BODY SERVICE 9-27