Suzuki GA413 Service Manual page 982

1. Immobilizer Control Module
2. Data link connector (DLC)
3. Fuse box
1. Steering column lower cover
1. Coil antenna
IMMOBILIZER CONTROL SYSTEM (IF EQUIPPED) 8G-23
IMMOBILIZER CONTROL MODULE
Removal
1) Disconnect negative (–) cable at battery.
2) Disconnect coupler at Immobilizer Control Module.
3) Remove immobilizer control module.
Installation
Reverse removal procedure for installation.
NOTE:
After replacing Immobilizer Control Module, be sure to regis-
ter Transponder code and ECM/Immobilizer Control Module
code in Immobilizer Control Module and ECM/Immobilizer
Control Module code in ECM by performing procedure de-
scribed in "Procedure After Immobilizer Control Module Re-
placement".
COIL ANTENNA
Removal
1) Disconnect negative (–) cable at battery.
2) Loosen steering column upper mounting bolts, then remove
steering column upper and lower cover.
4)Remove coil antenna.
Installation
For installation, reverse removal procedure.