Vacon NX Series Applications Manual page 81

MULTI-STEP SPEED CONTROL APPLICATION
Table 30: Motor control parameters, G2.6
Index Parameter
Current control P
P2.6.14.17
gain
Identification parameter group 2.6.15
P2.6.15.1 Speed step
* = Parameter value can only be changed after the AC drive has been stopped.
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
Min Max Unit
0.00 100.00 %
-50.0 50.0 0.0
Default Cust ID
40.00 617
0.0 1252
VACON · 81
Description
4