Vacon NX Series Applications Manual page 204

VACON · 204 MONITORING VALUE DESCRIPTIONS
1170 SHAFT ROUNDS (V1.21.6)
This monitoring value shows the shaft rounds from the encoder.
1173 FAULT WORD 2 (V1.22.11)
This monitoring value shows the bit-coded status of the Fault Word 2.
1172 FAULT WORD 1 (V1.22.10)
This monitoring value shows the bit-coded status of the Fault Word 1.
1174 ALARM WORD 1 (V1.22.12)
This monitoring value shows the bit-coded status of the Alarm Word.
1508 OUTPUT POWER (V1.21.24)
This monitoring value shows the output power.
1601 SB SYSTEMSTATUS (V1.23.1)
This monitoring value shows the status of the SystemBus.
1602 STATUS WORD (V1.23.4.2)
This monitoring value shows the status of the Status Word of the Follower drive.
1603 STATUS WORD D3 (V1.23.4.3)
This monitoring value shows the status of the Status Word of the Follower drive.
1604 STATUS WORD D4 (V1.23.4.4)
This monitoring value shows the status of the Status Word of the Follower drive.
1605 MOTOR CURRENT D2 (V1.23.3.2)
This monitoring value shows the measured current of the motor.
1606 MOTOR CURRENT D3 (V1.23.3.3)
This monitoring value shows the measured current of the motor.
1607 MOTOR CURRENT D4 (V1.23.3.4)
This monitoring value shows the measured current of the motor.
1615 STATUS WORD 1 (V1.23.4.1)
This monitoring value shows the status of the Status Word of the Follower drive.
1616 MOTOR CURRENT D1 (V1.23.3.1)
This monitoring value shows the measured current of the motor.
8
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/