Vacon NX Series Applications Manual page 337

PARAMETER DESCRIPTIONS
Table 198: Selections for parameter ID1082
Selection
Selection name
number
0 No response
1 Warning
Fault, stop mode after fault
2
according to ID506
Fault, stop mode after fault
3
always by coasting
1083 FOLLOWER TORQUE REFERENCE SELECTION 6 (2.11.4)
Use this parameter to select the torque reference for the follower drive.
1084 CONTROL OPTIONS 6 (2.4.19)
Use this parameter to select the control option.
The parameter is available for NXP drives only.
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
VACON · 337
Description
9