Vacon NX Series Applications Manual page 274

VACON · 274 PARAMETER DESCRIPTIONS
458 AUTOCHANGE 1/AUXILIARY DRIVE 1 CONTROL 7 (2.3.1.27)
Use this parameter to select a digital output for the autochange/auxiliary drive status.
Default programming: B.1
459 AUTOCHANGE 2/AUXILIARY DRIVE 2 CONTROL * 7 (2.3.1.28)
Use this parameter to select a digital output for the autochange/auxiliary drive status.
Control signal for autochange/auxiliary drive 2.
Default programming: B.2
460 AUTOCHANGE 3/AUXILIARY DRIVE 3 CONTROL * 7 (2.3.1.29)
Use this parameter to select a digital output for the autochange/auxiliary drive status.
Control signal for autochange/auxiliary drive 3. If three (or more) auxiliary drives are used,
we recommend to connect nr 3, too, to a relay output. Since the OPTA2 board only has two
relay outputs it is advisable to purchase an I/O expander board with extra relay outputs (e.g.
VACON OPTB5).
®
461 AUTOCHANGE 4/AUXILIARY DRIVE 4 CONTROL * 7 (2.3.1.30)
Use this parameter to select a digital output for the autochange/auxiliary drive status.
Control signal for autochange/auxiliary drive 4. If three (or more) auxiliary drives are used,
we recommend to connect nr 3 and 4, too, to a relay output. Since the OPTA2 board only has
two relay outputs it is advisable to purchase an I/O expander board with extra relay outputs
(e.g. VACON OPTB5).
®
462 AUTOCHANGE 5 CONTROL * 7 (2.3.1.31)
Use this parameter to select a digital output for the autochange status.
Control signal for autochange drive 5.
463 ANALOGUE INPUT SUPERVISION LIMIT * 7 (2.3.1.22)
Use this parameter to select a digital output for the analogue input supervision status.
The selected analogue input signal goes beyond the set supervision limits (see parameters
ID372, ID373 and ID374).
464 ANALOGUE OUTPUT 1 SIGNAL SELECTION * 234567 (2.3.1, 2.3.5.1, 2.3.3.1)
Use this parameter to connect the analogue output signal to the analogue output of your
choice.
For more information about the TTF programming method, see Chapter 9.9 "Terminal to
function" (TTF) programming principle.
9
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/