Vacon NX Series Applications Manual page 333

PARAMETER DESCRIPTIONS VACON · 333
level of the actual value signal (in mA) on the display, you wish to receive the amount of water
pumped in m3/s. You then set a value for parameter ID1033 to correspond to the minimum
signal level (0/4 mA) and another value for parameter ID1034 to correspond to the maximum
signal level (20 mA). The number of decimals needed can be set with parameter ID1035 and
the unit (m3/s) with parameter ID1036. The level of the actual value signal is then scaled
between the set min and max values and displayed in the selected unit.
The following units can be selected (parameter ID1036):
9
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/