Vacon NX Series Applications Manual page 278

VACON · 278
491 DIGITAL OUTPUT 2 ON-DELAY 6 (2.3.2.3)
Use this parameter to set the ON delay for the digital output.
492 DIGITAL OUTPUT 2 OFF-DELAY 6 (2.3.2.4)
Use this parameter to set the OFF delay for the digital output.
See parameters ID487 and ID488.
493 ADJUST INPUT 6 (2.2.1.4)
Use this parameter to select the signal that adjusts the frequency reference of the motor.
Table 149: Selections for parameter ID493
Selection
number
0 Not used
1 Analogue input 1
2 Analogue input 2
3 Analogue input 3
4 Analogue input 4
Signal from fieldbus (FBPro-
5
cessDataIN)
Fig. 66: An example of adjust input
494 ADJUST MINIMUM 6 (2.2.1.5)
Use this parameter to set additional scaling to the adjusted frequency reference.
9
Selection name
See Chapter 9.7 Fieldbus control parameters (IDs 850 to 859)
and parameter group G2.9
f/Hz
Adjusted
Adjust maximum
ID495 = 10%
44 Hz
40 Hz
36 Hz
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
PARAMETER DESCRIPTIONS
Description
Adjust 0%
Adjust minimum
ID494 = 10%
AI