Vacon NX Series Applications Manual page 200

VACON · 200 MONITORING VALUE DESCRIPTIONS
16 DIN4, DIN5, DIN6 (V1.14, V1.16)
This monitoring value shows the status of the digital inputs 4-6 in OPTA1 (Basic I/O).
17 DO1, RO1, RO2 (V1.15, V1.17)
This monitoring value shows the status of the digital output and relay outputs 1-2 in OPTA2
and OPTA3.
18 TORQUE REFERENCE (V1.18)
This monitoring value shows the final torque reference for motor control.
20 PID REFERENCE (V1.18, V1.19)
This monitoring value shows the PID reference as a percentage of the maximum frequency.
21 PID ACTUAL VALUE (V1.19, V1.20)
This monitoring value shows the PID actual value as a percentage of the maximum actual
value.
22 PID ERROR VALUE (V1.20, V1.21)
This monitoring value shows the error value of the PID controller.
23 PID OUTPUT (V1.21, V1.22)
This monitoring value shows the output of the PID controller as a percentage (0-100%).
25 FREQUENCY REFERENCE (V1.2)
This monitoring value shows the actual frequency reference to the motor control.
26 ANALOGUE IOUT (V1.15, V1.16, V1.18)
This monitoring value shows the status of the analogue output 1.
27 ANALOGUE INPUT 3 (V1.13, V1.16)
This monitoring value shows the status of the analogue input 3.
28 ANALOGUE INPUT 4 (V1.14, V1.17)
This monitoring value shows the status of the analogue input 4.
29 ACTUAL SPECIAL DISPLAY (V1.23)
This monitoring value shows the actual values of parameters for special display.
30 RUNNING AUXILIARY DRIVES (V1.22)
This monitoring value shows the actual number of auxliary drives that operate in the system.
8
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/