Vacon NX Series Applications Manual page 139

MULTI-PURPOSE CONTROL APPLICATION
Table 64: Digital ouput signals (Control keypad: Menu M2 -> G2.2.4)
Index Parameter
P2.3.3.1 * Ready
P2.3.3.2 * Run
P2.3.3.3 * Fault
P2.3.3.4 * Inverted fault
P2.3.3.5 * Warning
P2.3.3.6 * External fault
P2.3.3.7 * Reference fault/warning
P2.3.3.8 * Overtemperature warning
P2.3.3.9 * Reverse
P2.3.3.10 * Unrequested direction
P2.3.3.11 * At speed
P2.3.3.12 * Jogging speed
P2.3.3.13 * I/O control place
P2.3.3.14 * External brake control
External brake control,
P2.3.3.15 *
inverted
Output frequency limit 1
P2.3.3.16 *
supervision
Output frequency limit 2
P2.3.3.17 *
supervision
P2.3.3.18 * Reference limit supervision
Temperature limit supervi-
P2.3.3.19 *
sion
P2.3.3.20 * Torque limit supervision
P2.3.3.21 * Themistor fault or warning
Analogue input supervision
P2.3.3.22 *
limit
P2.3.3.23 * Motor regulator activation
P2.3.3.24 * Fieldbus DIN 1
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
Min Default Cust
0.1 A.1
0.1 B.1
0.1 B.2
0.1 0.1
0.1 0.1
0.1 0.1
0.1 0.1
0.1 0.1
0.1 0.1
0.1 0.1
0.1 0.1
0.1 0.1
0.1 0.1
0.1 0.1
0.1 0.1
0.1 0.1
0.1 0.1
0.1 0.1
0.1 0.1
0.1 0.1
0.1 0.1
0.1 0.1
0.1 0.1
0.1 0.1
VACON · 139
ID Description
432
433
434
435
436
437
438
439
440
441
442
443
444
445 See IDs 445 and 446 in Chap-
ter 9 Parameter descriptions.
446
See ID315 in Chapter 9
447
Parameter descriptions.
See ID346 in Chapter 9
448
Parameter descriptions.
See ID350 in Chapter 9
449
Parameter descriptions.
See ID354 in Chapter 9
450
Parameter descriptions.
See ID348 in Chapter 9
451
Parameter descriptions.
452
See ID356 in Chapter 9
453
Parameter descriptions.
454
455
6