Vacon NX Series Applications Manual page 237

PARAMETER DESCRIPTIONS
1. on the settings of parameters ID312 to ID314 (applications 3,4,5) or
2. on to which output the supervision signal 1 (ID447) is connected (applications 6 and 7).
Brake control uses different output functions. See ID445 & ID446.
316 OUTPUT FREQUENCY LIMIT SUPERVISION VALUE 234567 (2.3.11, 2.3.4.2, 2.3.2.2)
Use this parameter to set the limit supervision value for the output frequency when you
activate the limit supervision function.
Selects the frequency value supervised by parameter ID315.
f[Hz]
ID316
Example:
21 RO1
22 RO1
23 RO1
Fig. 40: Output frequency supervision
319 DIN2 FUNCTION 5 (2.2.1)
Use this parameter to select the function for the digital input signal.
This parameter has 14 selections. If digital input DIN2 need not be used, set the parameter
value to 0.
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
ID315 = 2
21 RO1 21 RO1
22 RO1 22 RO1
23 RO1 23 RO1
VACON · 237
t
9