Vacon NX Series Applications Manual page 202

VACON · 202 MONITORING VALUE DESCRIPTIONS
49 ID RUN STATUS (V1.21.14)
This monitoring value shows the status of the identification run.
50 SENSOR 1 TEMPERATURE (V1.21.8)
This monitoring value shows the measured value of the sensor 1 temperature.
51 SENSOR 2 TEMPERATURE (V1.21.9)
This monitoring value shows the measured value of the sensor 2 temperature.
52 SENSOR 3 TEMPERATURE (V1.21.10)
This monitoring value shows the measured value of the sensor 3 temperature.
53 ENCODER 2 FREQUENCY (V1.21.11)
This monitoring value shows the encoder 2 frequency from the OPTA7 board (input C.3).
54 ABS POSITION (V1.21.12)
This monitoring value shows the ABS position when the OPTBB board is in use.
55 ABS REVOLUTION (V1.21.13)
This monitoring value shows the number of ABS revolutions when the OPTBB board is in use.
56 DIN STATUSWORD 1 (V1.22.7)
This monitoring value shows the bit-coded status of the digital input signals.
57 DIN STATUSWORD 2 (V1.22.8)
This monitoring value shows the bit-coded status of the digital input signals.
58 POLE PAIR NUMBER (V1.21.15)
This monitoring value shows the pole pair number in use.
59 AI1 (V1.21.16)
This monitoring value shows the value of the analogue input signal as a percentage of the
used range.
60 AI2 (V1.21.17)
This monitoring value shows the value of the analogue input signal as a percentage of the
used range.
61 AI3 (V1.21.18)
This monitoring value shows the value of the analogue input signal as a percentage of the
used range.
8
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/