Vacon NX Series Applications Manual page 176

VACON · 176
Table 85: Basic parameters G2.1
Index Parameter
PID controller D-
P2.1.14
time
P2.1.15 Sleep frequency
P2.1.16 Sleep delay
P2.1.17 Wake up level
P2.1.18 Wake up function
Jogging speed
P2.1.19
reference
* = Apply the Terminal to Function method (TTF) to these parameters (see Chapter 9.9
"Terminal to function" (TTF) programming principle).
7
Min Max Unit
0.00 10.00 s
0 P2.1.2 Hz
0 3600 s
0.0 1000.0 %
0 3
0.00 P2.1.2 Hz
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
PUMP AND FAN CONTROL APPLICATION
Default Cust ID
0.00 132
10.00 1016
30 1017
25.0 1018
0 1019
10.00 124
Description
0 = Wake-up at fall
below wake up
level (P2.1.17)
1 = Wake-up at
exceeded wake up
level (P2.1.17)
2 = Wake-up at fall
below wake up
level (P3.4/3.5)
3 = Wake-up at
exceeded wake up
level (P3.4/3.5)