Vacon NX Series Applications Manual page 297

PARAMETER DESCRIPTIONS
Table 163: Selections for parameter ID641
Selection
Selection name
number
0 Not used
1 Analogue input 1
2 Analogue input 2
3 Analogue input 3
4 Analogue input 4
5 Analogue input 1 (joystick)
6 Analogue input 2 (joystick)
7 From keypad, parameter R3.5
8 Fieldbus torque reference
642 TORQUE REFERENCE SCALING, MAXIMUM VALUE 6 (2.10.4)
Use this parameter to set the maximum torque reference of the positive and negative values.
643 TORQUE REFERENCE SCALING, MINIMUM VALUE 6 (2.10.5)
Use this parameter to set the minimum torque reference of the positive and negative values.
Scale the custom minimum and maximum levels for analogue inputs within -300.0...300.0%.
644 TORQUE SPEED LIMIT, OPEN LOOP 6 (2.10.6)
Use this parameter to select the maximum frequency for the torque control.
Table 164: Selections for parameter ID644
Selection
Selection name
number
0 Maximum frequency
1 Selected frequency reference
2 Preset speed 7
NXP drives have more selections for this parameter in Closed Loop control mode. See
ID1278.
645 NEGATIVE TORQUE LIMIT 6 (2.6.23.21)
Use this parameter to set the torque limit for negative direction.
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
Description
See Chapter 9.7 Fieldbus control parameters (IDs 850 to 859).
Description
VACON · 297
9