Vacon NX Series Applications Manual page 233

PARAMETER DESCRIPTIONS
Defines the signal minimum to either 0 mA or 4 mA (living zero). Note the difference in
analogue output scaling in parameter ID311 (8-15).
Table 120: Selections for parameter ID310
Selection
Selection name
number
0 Set minimum value to 0 mA/0 V
1 Set minimum value to 4 mA/2 V
311 ANALOGUE OUTPUT SCALE 234567 (2.3.6, 2.3.5.6, 2.3.3.6)
Use this parameter to set the scaling factor for the analogue output.
Use the given formula to calculate the values.
Table 121: Analogue output scaling
Signal
Output frequency
Freq. Reference
Motor speed
Output current
Motor torque
Motor power
Motor voltage
DC-link voltage
PI-ref. value
PI act. value 1
PI act. value 2
PI error value
PI output
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
Max. value of the signal
Max frequency (parameter ID102)
Max frequency (parameter ID102)
Motor nom. speed 1xn
mMotor
Motor nom. current 1xI
nMotor
Motor nom. torque 1xT
nMotor
Motor nom. power 1xP
nMotor
100% x U
nmotor
1000 V
100% x ref. value max.
100% x actual value max.
100% x actual value max.
100% x error value max.
100% x output max.
VACON · 233
Description
9