Vacon NX Series Applications Manual page 201

MONITORING VALUE DESCRIPTIONS VACON · 201
31 ANALOGUE OUT 2 (V1.21.20)
This monitoring value shows the value of the analogue output 2 as a percentage of the used
range.
32 ANALOGUE OUT 3 (V1.21.21)
This monitoring value shows the value of the analogue output 3 as a percentage of the used
range.
37 FAULT HISTORY (V1.21.5, V1.22.5, V1.26.5)
This monitoring value shows the fault code of latest activated fault that is not reset.
39 U PHASE CURRENT (V1.18.5)
This monitoring value shows the measured phase current of the motor (1 s filtering).
40 V PHASE CURRENT (V1.18.6)
This monitoring value shows the measured phase current of the motor (1 s filtering).
41 W PHASE CURRENT (V1.18.7)
This monitoring value shows the measured phase current of the motor (1 s filtering).
42 SENSOR MAX TEMPERATURE (V1.19, V1.24)
This monitoring value shows the maximum temperature of the sensor.
43 STATUS WORD (V1.18.4, V1.21.4, V1.26.4)
This monitoring value shows the bit-coded status of the AC drive.
44 DC VOLTAGE (V1.18.3, V1.21.3, V1.26.3)
This monitoring value shows the unfiltered DC-voltage.
45 FB CURRENT (V1.21.6, V1.22.6, V1.26.6)
This monitoring value shows the measured current of the motor with fixed number of
decimals.
46 FB LIMIT SCALING (V1.22.2)
This monitoring value shows the value of the fieldbus limit scaling as a percentage.
47 FB ADJUST REFERENCE (V1.22.3)
This monitoring value shows the value of the fieldbus adjust reference as a percentage.
48 FB ANALOG OUT (V1.22.4)
This monitoring value shows the status of analogue output controlled by fieldbus input.
8
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/