Vacon NX Series Applications Manual page 208

VACON · 208
U[V]
Un
ID603
Default: Nominal
voltage of the motor
Fig. 24: Linear and squared change of the motor voltage
Un
ID603
ID605
ID606
Fig. 25: The programmable U/f curve
109 U/F OPTIMISATION (2.13, 2.6.2)
Use this parameter to set the U/f optimization.
9
Linear
Squared
U[V]
Default: Nominal
voltage of the motor
P2
P1
ID604
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
PARAMETER DESCRIPTIONS
Field
weakening
point
Default:
Nominal frequency
of the motor
ID602
P3
Field weakening point
Default: Nominal
frequency of the motor
f[Hz]
ID602
f[Hz]