Vacon NX Series Applications Manual page 10

VACON · 10
7.3 Control signal logic in Pump and Fan Control Application
7.4 Pump and Fan Control Application - Parameter lists
7.4.1 Monitoring values (Control keypad: Menu M1)
7.4.2 Basic parameters (Control keypad: Menu M2 -> G2.1)
7.4.3 Input signals
7.4.4 Output signals
7.4.5 Drive control parameters (Control keypad: Menu M2 -> G2.4
7.4.6 Prohibit frequency parameters (Control keypad: Menu M2 -> G2.5)
7.4.7 Motor control parameters (Control keypad: Menu M2 -> G2.6)
7.4.8 Protections (Control keypad: Menu M2 -> G2.7
7.4.9 Autorestart parameters (Control keypad: Menu M2 -> G2.8)
7.4.10 Pump and fan control parameters (Control keypad: Menu M2 -> G2.9)
196
7.4.11 Keypad control (Control keypad: Menu M3)
7.4.12 System menu (Control keypad: Menu M6)
7.4.13 Expander boards (Control keypad: Menu M7
8 Monitoring value descriptions
9 Parameter descriptions
9.1 Keypad control parameters
9.2 Master/follower function (NXP only)
9.2.1 Master/follower link physical connections
9.2.2 Optical fibre connection between AC drives with OPTD2
9.3 External brake control with additional limits (IDs 315, 316, 346 to 349, 352, 353)
354
9.4 Parameters of motor thermal protection (IDs 704 to 708)
9.5 Parameters of stall protection (IDs 709 to 712)
9.6 Parameters of underload protection (IDs 713 to 716)
9.7 Fieldbus control parameters (IDs 850 to 859)
9.7.1 Process data out (slave -> master)
9.7.2 Current scaling in different size of units
9.7.3 Process data in (master -> slave)
9.8 Closed loop parameters (IDs 612 to 621)
9.9 "Terminal to function" (TTF) programming principle
9.9.1 Defining an input/output for a certain function on keypad
9.9.2 Defining a terminal for a certain function with NCDrive programming
tool
9.9.3 Defining unused inputs/outputs
9.10 Speed control parameters (application 6 only)
9.11 Automatic changing between drives (application 7 only)
9.12 Interlock selection (P2.9.23)
9.13 Examples of Autochange and Interlock selection
9.13.1 Pump and fan automatics with interlocks and no autochange
9.13.2 Pump and fan automatics with interlocks and autochange
10 Fault tracing
10.1 Fault codes
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
TABLE OF CONTENTS
172
172
172
175
177
183
190
191
192
193
195
198
198
198
199
205
351
353
353
353
355
356
356
357
357
357
358
359
360
360
361
362
363
365
366
367
367
368
371
371