Vacon NX Series Applications Manual page 223

PARAMETER DESCRIPTIONS
This parameter selects the digital input which triggers active filter fault/warning according to
param. ID776. If the contact is closed, the response defined by parameter ID776 is triggered.
This parameter is present in NXP drives only.
NOTE!
This input is configured as normally open. If a normally closed input is needed,
consider using external fault.
300 START/STOP LOGIC SELECTION 2346 (2.2.1, 2.2.1.1)
Use this parameter to control the start and stop of the drive with the digital signals.
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
VACON · 223
9